Autopol Geisser

Cod: 030425, 030430


Polymerizing pot with high capacity tank (up to 6 litres), which allows to accommodate a considerable number of elements to polymerize. POLYMERIZING KETTLE

By means of an electronic control, temperatures can be regulated and maintained according to the times defined by the user.


“You will have no problems to fit your jobs inside”

At MESTRA, we love small machines, because we know that space is limited in modern dental laboratories. However, we are categorical that this reduction in size may under no circumstances affect the properties and operability of the device, at all.
The Autopol polymeriser faithfully complies with this doctrine: a tank of generous dimensions has been chosen for the design (6 litres and 210 mm diameter), comfortably meeting the production needs of a medium/large laboratory. We are certain that with such a large volume, you will have no problems to fit your jobs inside.



“We are talking about a machine which brings together pressure and temperature”

Type examination certificate

Directive 2014/68/UE (pressure equipment)

(TÜV Rheinland®)


It is well known that safety is one of the most important aspects for the MESTRA design team. But when the matter at hand is a machine that combines pressure and temperature, our concern for safety intensifies. The solution provided by our engineers is, once again, ingenious: to minimise the risks that pressure implies, they have opted for a tank WITHOUT WELDING, with a simple hole in the centre of the bottom, because that is where the lowest forces are exerted.

This configuration significantly reduces the risks of breakage of the tank from the effect of pressure. Nevertheless —just in case—, three further safety valves take charge of acting in the case of problems.

The electrical circuit follows the same philosophy. The heating elements have their operating temperature limited to 230°C by means of two heat sensors and a piece of software designed with safety criteria. By this strategy, the risk of accidents has been reduced to a minimum.


“At MESTRA, we have decided to construct a universal machine”

Automatic low-pressure polymerisers have traditionally been manufactured with criteria to adapt to the requirements of one specific material present on the market. Their temperatures are pre-established, making it very difficult to adapt the parameters of these machines to a new material.

Nobody can predict the future, and so no-one knows what new materials will appear on the market within a short
period of time, nor, most importantly, what polymerisation requirements they will demand.

Is it logical to have to change polymerisation machine when you decide to change to a new material? For this
reason, at MESTRA, we have decided to construct a universal concept of machine. Its time and temperature
parameters are easily programmable by the user, to adapt to any of the materials present on the market and also to those which may arrive.


“Design with the objective of achieving a practical and functional product”


The Autopol Polymerisation Pot, —as is the case with all MESTRA products— has been designed with the objective of offering a practical and functional item, which is also harmonious. The quality of the materials
used, the level of the finishes, the feel of the controls, the simplicity of use, the easy-to-close lid, and the ergonomics, are clear indicators of the demanding level to which MESTRA submits all its products.
All this attention to detail is readily observed in the Autopol polymeriser, whilst being at the same time difficult to define. As with the rest of our products, it comes with build features characteristic of the brand, which make it a very high quality and extremely reliable item. If you are already a MESTRA customer, you will already be certain of this.


Beauty needs no explanation

Nowadays, it is not enough for a machine to be functional and fulfil the task for which it was made. Designing an attractive product with charm, and which does not go unnoticed in the dental laboratory, is the finishing touch needed so that the product can be classed as “excellent”, something that the MESTRA team has striven for
throughout the execution of the Autopol project.

How can a manufacturer quantify the value which beauty brings to its product? There is no way of knowing. Perhaps Oscar Wilde’s response when he said: “And beauty is a form of genius —is higher, indeed, than genius, as it needs no explanation.” At MESTRA, we too believe that the beautiful lines of the Autopol polymeriser are in need of no explanation.


Ref. 030425 Ref. 030430
Operational pressure:
Maximum temperature:
Tank capacity:
Heating power:
350 mm
360 mm
400 mm
5 kg
2 bar
100 ºC
6 L
600 W
400 mm
360 mm
400 mm
5 kg
2 bar
100 ºC
8 L
600 W